The Tech What

The Tech What


How Do I Connect with Mywifiext Net Setup?

Netgear WiFi Extender Guide | Mywifiext Guide

WiFi Range Extenders are built to connect to your active or main WiFi of your home or work place, these extenders help in boosting up network to cover the Dead Zones of the area where network cannot reach. You can place the extender at your favorite spot connect which ranges up to 1500 sq feet from the main wifi and enjoy hassles free networks. From the Extender you can connect up to 25 Devices such as Laptop, smart phones, speakers, Ip cameras, tablets and more. It works both with the ethernet port and even even wireless. Basically you can call it a plug in Device.

Netgear mywifiext is Easy to set up and connect.

  • Now lets learn about how to connect New Extender to the main WiFi.
  • Connect to the power outlet switch on the Power, wait for a few seconds to let the power LED turn green. 
  • The Light must be solid green. 

How to Login for mywifiext extender setup?

  1. Connect your extender to the computer, laptop or any smartphone to complete the setup instructions. 
  2. Open any web browser such as google chrome or mozilla firefox. and search 
  3. This will navigate you to the mywifiext setup page.
  4. Go to the Address bar and type
  5. Click on the new setup button which will appear on the screen.
  6. Create an account.
  7. To access Mywifiext setup page, click on Continue.
  8. Place the extender to the desired place wherever you require the network and your setup is completed.

Important:- Netgear Nighthawk Mesh WiFi Extender Setup via or Mywifiext.local both are connected on the Same terms. 

Brief Points on how to access

  1. Once the extender is turned on the light is solid green.Type in the address bar.
  2. If the page does not open then try with the IP address
  3. To install your WiFi extender you need to login with your credentials(username and password).If username and password is incorrect then select forget and login with security questions.
  4. Proper installation will increase the range of your network.

 The extender does not take much of the space, it just needs one plug in socket. While setting up the extender keep the extender close to the wifi. Once the extender is connected to the router you can change the position of the extender. Just make sure that it is placed halfway from the main router and the area you want to network to be used.

If your extender does not work which can be because of the following reasons:

  1. If you have entered the wrong website instead of setup or the wrong IP address .
  2. If you are using outdated browser
  3. If there is any setting problem with your Firewall.
  4. Make sure you are connected to the extender network.

Reevaluate all the above points and try again. 

If still the problem is existing.Then we need to do troubleshooting.The troubleshoot steps are as follow:

  1. If you are setting the extender by ethernet make sure all your power cables and connections are properly placed. 
  2. If you were trying to connect it from a distance, change your position . Mostly preferable while setting up the network place extender near the router. 
  3. You then need to reset your extender.
  4. At the side of the extender you will see the Reset or Factory Reset button.
  5. Take a pointy object like a pin or paper clip and press it on the Reset button on the extender.
  6. Hold it for 5-7 seconds until the Power LED blinks then release it. 

Netgear WiFi Range Extender Setup Via 

Netgear Range Extender is just a Plug and play device and basically used to eliminate all the dead zones of your house , backyard and offices . It is also used to boost up your home internet network and you can also play online video games and can stream online games without buffering . It usually takes 5-10 minutes to set up and can easily be done through any smart device like mobile phone or desktop.

Here are few steps to login into your Netgear WiFi range extender via

  • Plug in your Netgear wifi range extender into a powerline.
  • Place it near your router.
  • Grab a smart device and open its wifi settings.
  • Now, look for Netgear_ext, connect to it.
  • Now open any web browser like google chrome or firefox.
  • Go to
  • Click on the New Extender Setup button.
  • Now fill in the login credentials.
  • Hit the finish button.

Note: If you still face any problem regarding connecting your extender to your wifi , feel free to connect to our expert at .